Thursday, January 13, 2011

Easy Ruffle tutorial

Okay, I have been working on a little project that I decided needed a pleated ruffle on the outside edge. I have never done a pleated ruffle, so I just decided to wing it. And, it was super easy and looks great when finished! So, I thought I would share.

First, I pulled out a handy-dandy craft stick. I have a million of them on hand because Brigham is slightly obsessed with them. Then, I added some marks. I just eye-balled what looked good, but in case you are interested, the measurements are 2" for the length and 0.75" for the fold. (I am sure that must be some mathematical ratio of some perfect form!) Anyway, I laid the craft stick down and put the "length" mark at the top edge. If you are just starting, this would be the edge of your ruffle fabric.
Then, I folded the fabric from the bottom back over the stick until it got to the "fold" mark.
Pull the craft stick out, and pin your fold down.
Repeat as many times as you need to get around your piece.
Then, you put your seam in, and flip it out. This is what the finished ruffle edge on mine looked like...
Aren't you dying to see what I made? Oh well, you will have to wait until I get Joy's done too...

Saturday, January 8, 2011

Sock Puppet tutorial

So, you want to make super-fantastic sock puppets that all the neighbor kids will be jealous of? Well, I guess I can let you in on my little secret. It is a piece of plastic in the mouth.
Here's how it works: Get an old milk jug and cut out a section of flat surface.
Now, fold that piece in half and cut a couple of ovals out. The size of your flat space will determine how many ovals you get out of it. And, your ovals should be about the size of your little one's finger-to-thumb space where they would normally stick the sock puppet mouth.
I can usually get two ovals out of a large flat. One..
and two. These don't need to be perfect, they are just going to be inside the mouth to give it some permanence.
Now, this step is really important if you want to spare your fingers glue gun misery. Push the toe of the sock inside to make a pocket. Don't go too far back, just a couple of inches. Test the space by sticking your plastic oval in it. The folded edge goes in first and should hit the toe of your sock, the rounded edges should about sit on your socks lips.
Now that you have your sock in position, take your cut and folded plastic between finger and thumb,
and run hot glue along the edges of both sides. Don't worry about that spot where you are holding, you can go back and get that later.
Now, this is the trickiest part of all. Really, it is persnickety. And I am not just saying that 'cause I like the word. You need to slip that hot-glued plastic into the pocket you created for the mouth, but you don't want the hot glue to touch the sock until it is in place. Just slide it in and squish it down. But, don't squish too hard or you will glue his mouth together. (If you need to do this for therapy since you can't do it to your kids, go ahead, glue those lips together.)
When you have this done, you can go back and glue those little spots on front and back where your fingers where.
Once you get the mouth in, it is the traditional stuff - eyes, hair, etc. Okay, I only do eyes and hair. But let me tell you, this little plastic bit makes the sock puppet SO much more functional! It will get played with far more often, because the mouth works! Hope you have fun!

Sunday, January 2, 2011

Happy Birthday Banner

Did I mention my most favorite gift for Christmas this year was a Silhouette? Well, I got one, and am in LOVE! Today was Joy's birthday, so I whipped out this super cool pendant banner, and she LOVED it! And, it was pretty easy.

To make it, I cut triangles from cardstock, and then cut her letters (500 pt Curlz font) out of coordinating paper. I glued the letters on with good old-fashioned Elmer's Glue (since I didn't have anything easier on hand). Then, I punched holes in the corners and threaded them through on 5/8" grosgrain ribbon. All in all, it was a pretty easy project, and the receiver appreciated it, which is even better.

I ordered a laminator which was supposed to have arrived on Friday, but when it gets delivered tomorrow, I will be laminating these puppies so this can be pulled out every year. I have decided that, when I do the boys, I will use darker colors for the background, they stood out much better. And, since they are boys, I will use a chunkier font so it shows up better. Who knows, I may even redo a few of Joy's. Nah, who am I kidding?
Posted by Picasa

Monday, November 15, 2010

Corn husk wreath

I found this cute wreath on HowDoesShe the other day, along with instructions. So, I tried it. And, although the copy of their copy of someone else's wreath didn't turn out perfect, it wasn't too bad. And it was really easy to accomplish.

I am not sure how I am going to store it, but I am certainly going to try!
Posted by Picasa

Sunday, October 24, 2010

Block Pumpkin

Looking for a cute, easy, fast, cheap Halloween/Thanksgiving decoration? Look no farther. These pumpkins are SUPER easy, and they turn out pretty darn cute. Ready for the instructions? Okay, here we go.

First, cut your block. I used a 2x2 (which really means a 1.5"x1.5") that I then cut down square. I also did a 4x4 (which really means 3.5x3.5) and squared that. Next, cut 5 pieces of orange-y scrapbook paper to the same squares. You can use all the same, all different, or any variety of the bunch. Just cut them. Next, follow these instructions and mod podge all sides of your block but one. (You know, six sides to your block, five pieces of paper...) Make sure you sand the edges, it will look MUCH cuter!
You will end up with one side of the block not covered, this is the bottom of your pumpkin. You could cover it, but no one will ever see it, so why bother?
Okay, now pull out your hammer and nails. I used a 2" common nail here, but if you can get a hold of horseshoe nails, those would be SO much cuter!
Hammer your nail on the side opposite the un-covered side. So, like, the top. Hammer the nail in until you get a good length stem. Now, if you can find nails a little shorter than the 2", that probably wouldn't be too bad. If you hammer the 2" ones in too far, your block will split in half. I only pounded them in about 1".

Wow, you are almost there! So far you have the pumpkin and the stem, now you just need leaves. I used some green grosgrain ribbon for this part. Feel free to get creative. I cut a piece about 4", but again, this is totally a matter of taste. A little more or less probably won't kill you.

Take your ribbon and tie it in a single knot around your nail, then slide it down to the base, so it is sitting right on top of the wood.
And, you're done! Cute pumpkins, very little time or expense. Enjoy!

Sunday, October 17, 2010

Wood Words

In quest of more Halloween decorations, I made these over the last two days. I got 4x4s, 2x4s and 2x2s and cut them down to fit the words that my sister Brya so kindly cut out of vinyl. Then, using some modge podge and scrapbook paper, I covered the boards in paper. After a little sanding, I added the letters and now have these great word boards!
When I feel like Brya has had enough of a break from her cutting, I am going to cover the back and bottom with autumnal paper and try a fall bunch! For easy modge podge instructions, see How Does She.
Posted by Picasa

Friday, October 15, 2010

More flowers

I know, I have gone a little crazy. But, they are so darned cute! I figured out today, that with 45" wide, 6" strip of fabric, I can make 8 flowers. With the fabric I got today, that means I have the potential of 56 flowers, and I only paid $2.50 for the fabric! I got lucky a year ago and and friend gave me a bunch of great buttons, and in my mind at least, the button makes a big difference. I guess I have a new treasure to look for at the thrift store now!

Posted by Picasa